Investigadores

Home / Investigadores

Ábrego, Javier

GPT Thermo-Chemical Processes Group Ph.D. Ingeniería Química
 
Universidad de Zaragoza
 
abrego@unizar.es
 
CV
Artículos principales:
 
Sewage sludge torrefaction in a fluidized bed reactor. Engineering Journal, 222, 15 April 2013, Pages 534-545, ISSN 1385-8947
http://dx.doi.org/10.1016/j.cej.2013.02.075.
 
Sewage Sludge Torrefaction in an Auger Reactor. Energy & Fuels 2015 29 (1), 160-170 DOI: 10.1021/ef501425h.
 
Sewage sludge pyrolysis for liquid production: A review. Renewable and Sustainable Energy Reviews, 16(5), June 2012, Pages 2781-2805, ISSN 1364-0321 http://dx.doi.org/10.1016/j.rser.2012.02.070.
 
Structural Changes of Sewage Sludge Char during Fixed-Bed Pyrolysis. Industrial & Engineering Chemistry Research 2009 48 (6), 3211-3221 DOI: 10.1021/ie801366t.
 
Technical and Energetic Assessment of a Three-Stage Thermochemical Treatment for Sewage Sludge. Energy & Fuels 2013 27 (2), 1026-1034 DOI: 10.1021/ef3018095.

Armenise, Sabino

Universidad Regional Amazónica IKIAM Ph.D. Ingeniería Química y Medio Ambiente
 
Universidad Regional Amazónica IKIAM
 
sabino.armenise@ikiam.edu.ec
 
CV
Artículos principales:
 
Ni on alumina-coated cordierite monoliths for in situ generation of CO-free H2 from ammonia. Journal of Catalysis, Volume 275, (2010), 228.
 
Control of nitrogen insertion during the growth of nitrogen-containing carbon nanofibers on cordierite monolith walls. Phys. Chem. Chem. Phys., Volume 14, (2012), 3568.
 
The formation of hydrothermal carbon coating on graphite microfiber felts for using as structured acid catalyst. Carbon, Volume 50, (2012), 1363.
 
Toward practical application Of H2 generation from ammonia decomposition guided by rational catalyst design. Catalysis Reviews: Science and Engineering, Volume 56, (2014), 220.
 
A Langmuir-Hinshelwood approach to the kinetic modelling of catalytic ammonia decomposition in an integral reactor. Phys Chem Chem Phys. Volume 15, (2013), 12104.

Ávila, Carlos

Universidad Regional Amazónica IKIAM Ph. D. Production Engineering (Computational Mechanics)
 
Universidad Regional Amazónica IKIAM
 
carlos.avila@ikiam.edu.ec
 
CV
Artículos principales:
 
Synthesis of boron carbon nitride oxide (BCNO) from urea and boric acid. 2016. Fullerenes Nanotubes and Carbon Nanostructures.
 
Effect of tilt angle of evacuated tubes on the temperature of the water. 2015. Información Tecnológica.
 
Single Phase Natural Circulation Flow through Solar Evacuated Tubes Collectors on the Equatorial Zone. 2015. Energy Procedia. Elsevier.
 
Advances in multiscale modeling and characterization of granular matter. Procedia IUTAM. Elsevier.

Bimbela, Fernando



Universidad Pública de Navarra
Ph.D. Ingeniería Química
 
Universidad Pública de Navarra
 
fernando.bimbela@unavarra.es
 
CV
Artículos principales:
 
Issues concerning the use of renewable Ca-based solids as transesterification catalysts. Fuel 158 (2015) 558-564.
 
Pyrolysis of red eucalyptus, Camelina straw and Wheat straw in an ablative reactor. Energy & Fuels 29 (2015) 1766-1775.
 
Desulfurization and catalytic gas cleaning in fluidized bed co-gasification of sewage sludge-coal blends. Energy &Fuels 27 (2013) 2846-2856.
 
Ni/Al coprecipitated catalysts modified with magnesium and copper for the catalytic steam reforming of model compounds from biomass pyrolysis liquids. Applied Catalysis B: Environmental 119-120 (2012) 1-12.
 
Hydrogen production by catalytic steam reforming of acetic acid, a model compound of biomass pyrolysis liquids. Journal of Analytical and Applied Pyrolysis 79 (2007)112-120.

Espinoza, Rodrigo

Universidad de Chile Doctor en Ciencias de la Ingeniería, Mención Ciencias de los Materiales
 
Universidad de Chile
 
roespinoza@uchile.edu.cl
 
CV
Artículos principales:
 
One-Dimensional TiO2-B Crystals Synthesised by Hydrothermal Process and Their Antibacterial Behaviour on Escherichia coli. Journal of Nanomaterials Vol. 2016 (2016) 7213672.
 
Nanocrystalline carbon flakes deposited by RF magnetron sputtering. Materials Letters, Vol. 167 (2016) pp. 242-245.
 
The Use of Ultrasound to Measure Dislocation Density. JOM, Vol. 67-8 (2015) pp. 1856-1863.
 
Mineral magnetite as precursor in the synthesis of multi-walled carbon nanotubes and their capabilities of hydrogen adsorption. International Journal of Hydrogen Energy Volume, Vol. 40-45 (2015) pp. 15540-15548.
 
Mechanochemical Processing of CaCu3Ti4O12 with Giant Dielectric Properties. Materials and Manufacturing Processes, Vol. 29-10 (2014) pp. 1179-1183.

Labrador, Henry

Universidad de Carabobo Doctor en Ciencias, Mención Química
 
Universidad de Carabobo
 
hjlabrad@uc.edu.ve
 
CV
Artículos principales:
 
A computational analysis of Non-Covalent interactions between aromatic compunds. Journal de Computation Methods in Science and Engineering, 12, (2012) 353-359.
 
Evaluación del crudo extra pesado mediante Hidrotratamiento con variación de la temperatura utilizando un catalizador Mesoporooso Mcm-41”. Revista Ingeniería UC, Vol. 19, N° 2, agosto 2012.
 
Hidrotratamiento de asfaltenos y sus fracciones A1 y A2 en condiciones de baja severidad empleando sulfuros másicos mixtos de NiFeNb no frescos. Revista Ingeniería UC, Vol. 20, N° 1, abril 2013.
 
Síntesis y evaluación del N,N,N’-TRIMETIL-N’-OCTADEIL-1,2-DIAMINOPROPANO(TODE) como dispersante de la fracción de asfaltenos. Redip. UNEXPO. VRB. Venezuela. Vol.4. N° 1, 2014.
 
Upgrading and Hydrotrating of heavy oils and residual. Energy Science and Technology. Vol. 3. In Oil and Natural Gas, Studium Press LLC, U.S.A (2015).

Méndez, Franklin

Universidad Nacional Autónoma de México UNAM Doctor en Ciencias, Mención Química
 
Universidad Nacional Autónoma de México
 
frankmendez.mz@gmail.com
 
CV
Artículos principales:
 
Selective hydrogenation of 1,3-butadiene in presence of 1-butene under liquid phase conditions with NiPd/Al2O3 catalysts. ACCEPTED [2016-03-17] for publication in Applied Petrochemical Research.
DOI: 10.1007/s13203-016-0149-y.
 
Synthesis and characterization of alumina-coated aluminum sponges manufactured by sintering and dissolution process as possible structured reactors. Materials Chemistry and Physics 171 (2016) 216-221. DOI:10.1016/j.matchemphys.2016.01.008.
 
Microstructural study of FeMo/MgO catalysts prepared by sol-gel and coimpregnation and their relationship with the growth of carbon nanotubes. Diamond and Related Materials 60 (2015) 35-41.
DOI:10.1016/j.diamond.2015.10.011.
 
Catalizadores M-Mo/HMS (M =Fe, Co o Ni) en sus formas sulfuradas y nitruradas como potenciales sistemas catalíticos de hidrodesulfuración. Avances en Química 10:1 (2015) 55-65. ISSN:1856-5301.
 
Ent-Kaurane diterpenoid glycosides as soft-templates for the synthesis of high-surface area anatase titanium dioxide. An electron microscopy study and Rietveld refinement. Biointerface Research in Applied Chemistry 5:1 (2015) 903-909. ISSN:2069-5837.

Villasana, Yanet

Universidad Regional Amazónica IKIAM Doctora en Ciencias, Mención Química
 
Universidad Regional Amazónica IKIAM
 
yanet.villasana@ikiam.edu.ec
 
CV
Artículos principales:
 
Maya crude oil hydrotreating reaction in a batch reactor using NiMo carbide and nitride as catalysts. Catalysis Today (2014) 220-222:318-326.
 
Atomic ratio effect on catalytic performance of FeW-based carbides and nitrides on thiophene hydrodesulfurization. Fuel (2013) 110:259-267.
 
Promoting effect of ceria on the performance of NiPd/(CeO2-Al2O3 catalysts for the selective hydrogenation of 1,3-butadiene in presence of 1-butene. Este artículo fue enviado a una revista para su revisión.
 
Synthesis and characterization of alumina-coated aluminum sponges manufactured by sintering and dissolution process as possible structured reactors. Materials Chemistry and Physics, (2016) 171:216-221.
 
Mesoporous catalysts based on Keggin-type heteropolyacids supported on MCM-41 and their application in thiophene hydrodesulfurization. Fuel (2013) 110:249-258.